CFRP反射器型面主动控制和作动器位置优化

研究了运用压电陶瓷作动器对碳纤维增强复合材料（CFRP）格栅反射器的型面主动控制。首先，采用了一种具有独立电压自由度的梁单元，以及考虑高阶剪切变形的板单元，对主控格栅反射器进行有限元建模；运用能量变分哈密尔顿原理推导了主控格栅反射器的有限元控制方程，并给出了反射面型面残余均方根（RMS）误差最小的电压最优控制方法。然后，研究了在典型载荷下，反射面残余RMS误差最小的PZT作动器位置分布的优化配置问题；提出了一种将遗传算法和梯度投影方法相结合的改进优化方法，用来求出在限定作动器数量的条件下，作动器几何位置的优化配置，使控制后反射面的残余RMS误差最小；给出的数值算例验证了方法的正确性和有效性。最后，研制了格栅反射器型面主动控制的实验样机，针对反射器的初始制造误差进行了型面主动控制，验证了控制方法的可行性和有效性。     

Obscured Activity: AGN, Quasars, Starbursts and ULIGs Observed by the Infrared Space Observatory

Some of the most ‘active’ galaxies in the Universe are obscured by large quantities of dust and emit a substantial fraction of their bolometric luminosity in the infrared. Observations of these infrared luminous galaxies with the Infrared Space Observatory (ISO) have provided a relatively unabsorbed view to the sources fuelling this active emission. The improved sensitivity, spatial resolution and spectroscopic capability of ISO over its predecessor Infrared Astronomical Satellite (IRAS) of enabled significant advances in the understanding of the infrared properties of active galaxies. ISO surveyed a wide range of active galaxies which, in the context of this review, includes those powered by intense bursts of star formation as well as those containing a dominant active galactic nucleus (AGN). Mid-infrared imaging resolved for the first time the dust enshrouded nuclei in many nearby galaxies, while a new era in infrared spectroscopy was opened by probing a wealth of atomic, ionic and molecular lines as well as broad band features in the mid- and far-infrared. This was particularly useful, since it resulted in the understanding of the power production, excitation and fuelling mechanisms in the nuclei of active galaxies including the intriguing but so far elusive ultraluminous infrared galaxies. Detailed studies of various classes of AGN and quasars greatly improved our understanding of the unification scenario. Far-infrared imaging and photometry revealed the presence of a new very cold dust component in galaxies and furthered our knowledge of the far-infrared properties of faint starbursts, ULIGs and quasars. We summarise almost nine years of key results based on ISO data spanning the full range of luminosity and type of active galaxies.     

Relativistic MHD Simulations of Jets with Toroidal Magnetic Fields

This paper presents an application of the recent relativistic HLLC approximate Riemann solver by Mignone & Bodo to magnetized flows with vanishing normal component of the magnetic field. The numerical scheme is validated in two dimensions by investigating the propagation of axisymmetric jets with toroidal magnetic fields. The selected jet models show that the HLLC solver yields sharper resolution of contact and shear waves and better convergence properties over the traditional HLL approach.     

延长热电池寿命的途径探讨

从防空导弹地面电源－－热电池的热设计和工艺角度出发，分析影响电池工作寿命的因素，提出延长电池工作寿命的三条途径：合理控制热电池的内部热量；提高加热片的均匀性；合理选择外保温材料。实践证明，这些途径是可行的。     

稀土对电沉积镍基复合镀层高温抗氧化性的影响

研究了稀土加入三种电沉积镍基复合镀层Ni—B_4C、Ni—TiC、Ni—ZrO_2前后,在850℃时的氧化行为。通过金相观察、ESCA(光电子能谱)分析及X射线衍射等方法研究表明:镀层中不同的复合颗粒和稀土两者对镀层的抗氧化能力均有影响。其小不同种类的颗粒对镀层抗氧化能力所产生影响的差别很明显;而稀土对镀层抗氧化能力影响的差别较小,且影响的程度比较接近。另外,两者影响的机理也不同。颗粒是通过分解、扩散等过程改变表面膜的组成来影响的,而稀土则是从提高膜的致密度和膜与基体的粘附性来影响的。作者认为,它们的影响既互相独立,而又互相补充。     

雷达有源诱偏与反辐射导弹对抗仿真技术

简要分析反辐射对抗技术的发展应用情况,分析并提出了雷达有源诱偏与反辐射导弹对抗性能评估试验方法,最后介绍了一种抗反辐射导弹有源诱偏路馈半实物仿真系统研制与试验情况。     

硝酸羟胺水溶液的制备及其含量分析

以复分解法制备硝酸羟胺(HAN)水溶液，用正交实验分析了反应温度、反应时间和减压蒸馏温度对反应产率的影响。确定的实验室最佳制备条件为：反应时间25min，反应温度60℃，减压蒸馏温度50℃。并比较了氧化还原滴定法与酸碱滴定法测定硝酸羟胺水溶液中硝酸羟胺含量的精度。     

翼板颤振主动抑制的无限维非线性分析

 <正> 1.混合动力学系统的Hopf分叉定理 本文将Marsden-McCracken关于分布参数的Hopf分叉定理推广至混合动力学系统。 设在积空间X=E×R~n中依赖参数μ的演化方程为     

CMG磁悬浮转子系统的模型与控制律

 以刚体的平动和转动为状态构造主动磁轴承(AMB) 转子控制系统模型,可以清晰反映控制力矩(CMG) 陀螺效应的影响。利用此模型,着重分析了目前常用的分散控制和分散加交叉控制方式下转子的后向涡动特征,并提出模态解耦控制的概念,指出此控制律可以根除转子的后向涡动,且具有最佳的稳定性。     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制，在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理，阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试，表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明，微致动器作动可以影响翼型表面的压强分布，从而可用于增升等控制目的。